Lintlha tsa Motheo
|
Lintho tse bonahalang |
Tšepe e sa hloekang, Koporo, Aluminium |
Lintlha tsa bohlokoa tsa ho rekisa |
Bophelo bo Botelele ba Tshebeletso, Eco-Botswalle |
|
Palo ea li-volts |
220 V, 380 V |
Mofuta oa Mocheso oa Mocheso |
Fin Tube Heat Exchanger |
|
Boholo ba mocheso oa ho sebetsa |
-10-300c |
Bokhoni ba Phallo |
Customize |
|
Tšebelisano ea Mokelikeli |
mouoane, oli e chesang, metsi a chesang |
Likarolo tsa mantlha |
Qetellong, Tube |
|
Tiisetso |
1 Selemo |
Tlaleho ea teko ea mechine |
Fanetsoe |
|
Tlhahlobo{0}}ea video e hlahang |
Fanetsoe |
Sebaka sa tlhaho |
Guangdong, China |
|
Boima (KG) |
300 |
Lebitso la lebitso |
Hylita |
|
Sekhahla sa Phallo ea Mokelikeli |
0.1~10 M/s |
Boemo bo phahameng ba Khatello |
4.5Mpa |
|
Dimension(l*w*h) |
Customize |
Mofuta oa Mocheso oa Mocheso |
Tube Fin Heat Exchanger |
|
Kopo |
Sistimi ea HVAC, Boiler |
Lebitso |
mochini o futhumatsang moea ho isa ho metsi |
|
Lisebelisoa tsa tube |
Koporo |
Fin material |
Aluminium |
|
Mofuta oa tube |
Boreleli |
Mofuta oa ho qetela |
E koaletsoe |
|
Mofuta oa khokahano |
khoele, Welded |
Lisebelisoa tsa foreimi |
Tšepe e entsoeng ka galvanized |
|
Fin surface |
Epoxy (khauta), Blue (hydrophilic), Pente ea phofo, Bare |
Lihlopha tsa ho rekisa |
Ntho e le 'ngoe |
|
Boholo ba sephutheloana se le seng |
200X50X200 cm |
Boima bo le bong |
200.000 lik'hilograma |
Tlhaloso ea Lihlahisoa
Boima ba Boima ba DX Evaporator le Coil ea Condenser Bakeng sa Litsamaiso tsa HVAC
-Coil e sebetsang ea Evaporator: The Ultimate Refrigeration Solution
Likhoele tsa rona tsa metsi ho ea moeeng li sebelisa{0}grade 3/8" li-tubing tsa koporo tse phahameng, tse atolositsoeng ho ba mapheo a aluminium a masenke hore a fetisoe ka mocheso o phahameng haholo. E fumaneha ka mokhoa o ikhethileng, ho kenyeletsoa metsi a batang, metsi a chesang le mefuta ea DX. Karolo ka 'ngoe e etsa liteko tse matla tsa ho lutla ho netefatsa hore e tšoarella.
Melemo ea Hylita Industrial Condenser
Phetisetso ea Mocheso e Sebetsang: Moralo oa mapheo a koaletsoeng o eketsa moferefere, o eketsa katleho ea phapanyetsano ea mocheso ka 25%.
Sebaka sa Phetisetso ea Mocheso: Tokiso e phahameng-e matlafatsang mapheo a mapheo a phahameng e holisa bokaholimo bakeng sa ho pholisa hantle libakeng tse momahaneng.
Leak-Bopaki: Precision brazed U-likoba tse lekiloeng ka 3.0 Mpa nitrogen pressure li netefatsa hore ha ho na letho le ka tšeptjoang.
Sesebelisoa: E loketse indasteri ea AHU, tsamaea-ka lihatsetsi, mochini o omisang mouoane, le lisebelisoa tse ling tsa Carrier.
Kemiso e Tsitsitseng: E entsoe ka casing ea tšepe e kentsoeng ka masenke le masoba a hloekisitsoeng hantle bakeng sa ho lekana kapele, ka mokhoa o sireletsehileng.
Moralo oa Tloaelo: Re fana ka lits'ebeletso tsa OEM ho pheta boholo ba coil, lisebelisoa le sebaka sa mapheo ka nepo.
Tiisetso ea Selemo se 1: Boleng bo netefalitsoeng ba ISO 9001 bo tšehelitsoe ke tiisetso e felletseng ea selemo se le seng khahlano le bofokoli.
Ho boloka Matla: Potoloho e ntlafalitsoeng e fokotsa ho theoha ha khatello, ho theola fan le tšebeliso ea matla ea pompo haholo.
Phatlalatso e Potlakileng: Ho etsa lintho ka mokhoa o bonolo ho lumella hore ho be le phetoho e potlakileng ea li-coil tse ncha ho fokotsa nako.
Tšebelisano e Pharalletseng: E lumellana le metsi a batang, metsi a chesang, mouoane, brine, le lisebelisoa tsa sehatsetsi sa DX.
Thepa e tšoarellang: Epoxy kapa nano{0}}coating e fumanehang bakeng sa tšireletso e matlafalitsoeng tikolohong ea leoatle.
Tšehetso ea Theknoloji: Sehlopha sa boenjiniere sa litsebi se fana ka lipalo tsa mahala tsa mocheso le lits'ebeletso tsa netefatso ea ho taka.
Litlhaloso tsa Tekheniki
| Lisebelisuoa tsa Tube | Koporo, Tšepe e Hloekileng 304/316L |
| Lintho Tse Feletseng | Aluminium (Hydrophilic/Epoxy), Koporo |
| Tube Diameter | 3/8", 1/2", 5/8" (7mm, 9.52mm, 15.88mm) |
| Fin Spacing | 4 FPI ho isa ho 16 FPI (E ka fetoha) |
| Khatello ea Teko | 2.5 - 3.0 Mpa (Nitrogen) |
| Thepa ea Frame | Leqephe la Galvanized kapa tšepe e sa hloekang |
| Mela | Mela e 2 ho isa ho e 12 e Tebileng |
| Setifikeiti | CE, ISO 9001, RoHS |
| Mahareng | Metsi, Glycol, Freon, Mouoane, Oli |
| MOQ | Sekhechana se le 1 (Ho Amoheloa Phetoho e Tloaelehileng) |
Lisebelisoa
● HVAC Air Handling Units (AHU)
● Mekhoa ea ho Pholisa ea Mekhoa ea Liindasteri
● Tsamaea ka-ka Lihatsetsi le Bobolokelo bo Batang
● Textile Drying Steam Heater Systems
● Data Center Precision Cooling
● Limela tsa ho Feta Lijo le Lino
● Pheliso ea Mocheso oa Semela sa Lik'hemik'hale
● Marine Offshore Platform HVAC
● Maemo a Sehatsetsi a Supermarket
● Taolo ea Mocheso oa Mocheso
Likarolo tsa Bohlokoa
Phetoho e Otlolohileng: Papali e phethahetseng bakeng sa letoto la Carrier 38AP, ha ho na phetoho e hlokahalang.
Lerako le Letenya la Tube: Re sebelisa botenya ba 0.41mm+ khahlanong le 0.28mm ea bahlolisani bakeng sa nako e telele ea bophelo.
Teko e Phahameng ea Khatello: 100% ho fumanoa ha helium leak ho netefatsa bofokoli ba zero pele ho romelloa.
Software e tsoetseng pele: software ea khetho ea VRV/VRF e netefatsa lipalo tse nepahetseng tsa ts'ebetso ea mocheso.
Tšireletso ea Corrosion: Ho ikhethela khauta ea khauta kapa ho roala ha Blygold bakeng sa tikoloho e feteletseng ea lebopo.
Lintlha tsa Thepa
|
Lintho tse bonahalang |
Thepa ea Bohlokoa |
Likopo tse Tloaelehileng le Maemo |
|
Tšepe ea Carbon |
Matla a holimo, -e sebetsa hantle |
E amohetsoe haholo bakeng sa likhetla tsamaisong ea liindasteri (mohlala, ASME SA-516 Gr. 70), e loketseng tikoloho e sa senyeng le mocheso o itekanetseng.<300°C). |
|
Ts'epe e sa beng le mabali |
Ho hanyetsa kutu e ntle haholo (mohlala, SS304/316), ts'ebetso e ntle ea mocheso |
E loketse lik'hemik'hale, ho lokisa lijo, le lisebelisoa tsa HVAC (ASTM A240), tse hananang le chloride{1}e nang le maro (mohlala,< 1000 ppm Cl⁻). |
|
Lisebelisoa tsa Nickel |
Ho hanyetsa ho hoholo ha kutu e feteletseng (mohlala, Inconel 600/625, Hastelloy C-276) |
Selected for high-temperature (>800℃) kapa tikoloho e mabifi (mohlala, sulfuric acid, ho ntša letsoai metsing a leoatle), e tsamaellanang le NACE MR0175/ISO 15156. |
|
Lisebelisoa tsa Koporo |
Ts'ebetso e phahameng ea mocheso (mohlala, CuNi 70/30, Brass) |
E tloaeleha ho li-condenser le lisebelisoa tsa ho pholisa tse nang le-metsi a sa senyang (ASTM B111), a lekanyelitsoeng ho <150 degrees le tikoloho eo e seng{3}}ammonia. |
|
Titanium |
Khanyetso e ikhethang ea kutu (mohlala, Kereiti ea 2/Kereiti ea 7) |
E bohlokoa bakeng sa ts'ebeliso ea metsi a leoatle (mohlala, lipolanete tsa leoatleng, tse kantle ho naha), tse hanyetsanang le chloride, acid, le biofouling (ASTM B338 Gr.2). |
Karolo e ka Sehloohong - Tube:
• Li-tubes tse tloaelehileng ke 5/8", 1/2" ,5/8", 20, 1" OD.
• 304, 316 tšepe e sa hloekang, koporo, titanium, tšepe e chesang ea galvanized kapa aluminium.
• Li-tubes li hlophisitsoe ka hare ho tsela eo moea o phallang ka eona bakeng sa phetisetso e phahameng ea mocheso le ho theoha ha khatello e tlase ea moea.
Ho atolosoa ha tube, nakong ea ho phatloha, ho lumella ho kopana ho phethahetseng pakeng tsa li-tubes le mapheoana 'me ka lebaka leo ho tiisa phapanyetsano e sebetsang ea mocheso.
Karolo e ka Sehloohong - Qetello:
• Lintho tse tloaelehileng tsa fin ke aluminium, koporo, tšepe e sa hloekang, titanium
• Mapheo aa shoa-a etsoa sebopeho sa masenke (waffle) ho khothaletsa moea o ferekaneng le ho ntlafatsa phetiso ea mocheso.
bokgabane.
• Mapheo a na le mefuta e fapaneng ea sebaka.
Mapheo, a entsoeng ka aluminium, aluminiamo e tsoetseng pele kapa koporo, a hatelloa ka mokhoa o itseng oa ondulation o eketsang
phapanyetsano ea mocheso pakeng tsa moea le lepheo ho fokotsa tahlehelo ea mojaro ka lehlakoreng la moea le ho khothaletsa ka nako e ts'oanang ho phalla ha
condensation kapa ho qhibidiha metsi.
Karolo e ka Sehloohong - Letlapa & Frame:
• Thepa e tloaelehileng ea khabinete/casing ke tšepe e sa bolaeeng ke kutu.
• Re boetse re fana ka aluminium, khabinete ea tšepe e sa hloekang le casing
Moqapi oa Boenjiniere
Re sebelisa feela HTRI le software ea moralo oa EDR ho tsoa ho mofani oa mananeo a tsebahalang oa Europe.
Ka lilemo tse 18 tsa tšebelisano-'moho ea maano, re atlehile ho rala, ho etsa, le ho romela licheso tsa mocheso linaheng tse fetang 50 lefatšeng ka bophara.
Maikutlo a bareki a lula a tiisa hore ts'ebetso ea 'nete ea ho pholisa e lumellana hantle le litekanyetso tsa moralo.
Re ka fana ka setšoantšo se qaqileng ka mor'a odara ea hau. Re ka boela ra fana ka litšebeletso tsa Custom .
Lisebelisoa tsohle tsa mocheso li etsa teko e matla ea khatello: yuniti ka 'ngoe e lekoa habeli ho 2.5 MPa mme e tlameha ho tšoara khatello bonyane metsotso e 15 ho netefatsa ho hanyetsa khatello le ho netefatsa hore ha ho na ho lutla.
Customer Case Photos
Naha: UAE
Kopo: Litsi tse bohareng tsa moea bakeng sa mabenkele a khoebo
Boitsebiso: Copper Tube e nang le Hydrophilic Aluminium Fin
Kopo: Sistimi ea ho pholisa metsi a leoatle bakeng sa likepe tsa ho tšoasa litlhapi tsa kantle ho naha
lintho tse bonahalang: Titanium
Kopo: Mouoane condensation bakeng sa ts'ebetso ea ho thibela lero la litholoana
lintho tse bonahalang: Stainless Steel 316L
Kopo: Pholiso ea oli ea Hydraulic bakeng sa mochini oa ho bopa ente ea polasetiki
Lintho tse bonahalang: Shell ea tšepe ea Carbon e nang le Copper Tubes
Kopo: Setsi sa condensing bakeng sa literaka tsa lipalangoang tse nang le sehatsetsing
lintho tse bonahalang: Aluminium (Parallel Flow Microchannel)
Kopo: Kholiso ea mouoane oa mouoane bakeng sa limela tsa lik'hemik'hale
lintho tse bonahalang: Stainless Steel 316L (Boloko bo Welded ka ho Feletseng)
Kopo: Khase ea Boiler Flue Gas Condensing Heat Recovery
Boitsebiso: Tube{0}} Stainless Steel 316L; Fin- Aluminium (e nang le epoxy coating) Matla a Phepelo: 400V / 3P / 50Hz
Customer Feedback
Ho paka & Delivery
Sephutheloana se tloaelehileng ke mabokose a lehong.
Bakeng sa ho romelloa kantle ho naha ho ea linaheng tsa Europe, mabokose a lehong a fuoa kalafo ea mosi.
Haeba sebaka sa setshelo se lekanyelitsoe, re ka fetohela ho sephutheloana sa lifilimi tsa PE kapa ra amohela likopo tse khethehileng tsa ho paka tse tsoang ho bareki.
Boemo ba Khoebo
ke hobane'ng ha u khetha lihlahisoa tsa rona
Shenzhen Hylita Heat Exchanger Co., Ltd.
Ntlo-khōlō ea rōna e Shenzhen, e nang le liofisi tsa makala Guangzhou, Tangshan le Wuhan.
Re fana ka potefolio e felletseng ea li-heaters tsa mocheso tse sebeletsang indasteri, lijo le seno, HVAC, marine, ho tšoara moea le ho pholisa, lik'hemik'hale tsa peterole, tsa phepelo ea motlakase le lihatsetsi.
Liyuniti tsa Hylita Industrial Condenser li fumaneha ka bobeli-ka mefuta e meng e tobileng (100% e lumellana le lintlha tsa OEM) le litlhophiso tse hlophisitsoeng ka botlalo tse etselitsoeng ho fihlela litlhoko tse itseng tsa ts'ebeliso.
LBH
1.Order Security & Online Transactions
P: Na re ka odara ka Alibaba Trade Assurance bakeng sa polokeho?
A: E, re e khothaletsa haholo! Trade Assurance e boloka tefo ea hau 100%. Ha re kopantsoe le nalane ea rona ea lilemo tse 10, o ka beha odara ea hau ea pele ka kholiseho e felletseng.
2. Taolo ea Boleng
P: U etsa bonnete ba hore boleng pele u romelloa?
A: Botumo ba rona bo hahiloe holim'a litšiea tsa boleng ba 4 tsa mantlha
✅ Boiphihlelo: Moetsi ea khethehileng ho tloha ka 2015 (10+ Lilemo).
✅ Setifikeiti: ISO 9001:2015, CE, ROHS
✅ Tiisetso: Teko ea khatello ea 100% ho yuniti e 'ngoe le e' ngoe pele e romelloa
✅ Global Trust: E atlehile ho sebeletsa bareki linaheng tse fetang 50+.
3. Moralo & Palo
P: Ha ho setšoantšo? O ka nketsetsa moralo?
A: Ho joalo! Re sebelisa software ea HTRI ho etsa boholo bo nepahetseng. Abelana feela lintlha tsa hau tsa ts'ebetso (Temp/Flow), 'me re tla fana ka moralo oa setsebi bakeng sa tumello ea hau.
4. Minimum Order Quantity (MOQ)
P: MOQ ke eng? Nka kenya odara e nyane ka kopo?
A: Taelo e nyane e boetse e amoheloa k'hamphaning ea rona.
5. Tšebeletso ea Tiisetso
P: Tiisetso e fana ka nako e kae?
A: Re fana ka likhetho tse feto-fetohang tsa waranti ho lumellana le litlhoko tsa hau:
✅ E tloaelehileng: Likhoeli tse 12 bakeng sa litaelo tsohle.
✅ E atolositsoe: Ho fihla ho Likhoeli tse 24 bakeng sa liodara tse lokiselitsoeng (tiisa le sehlopha sa rona).
6. Ho iketsetsa
P: Na u tšehetsa OEM / ODM le ho etsa letšoao ka tloaelo?
A: E, mokhoa o feletseng oa ho itloaetsa o teng. Re ts'ehetsa lisebelisoa tsa tloaelo (Copper, SS304/316, Cu-Ni) 'me re fana ka Laser Marking & Nameplates
ho hlahisa logo ea hau hantle.
7. Boitlamo ba Tšebeletso
P: U boloka joang hore ke ntlafatsoe ka odara ea ka?
A: Re netefatsa 100% Ts'ebetso ea Transparency
✅ Netefatso e Habeli: Lintlha tsohle li netefalitsoe pele tlhahiso e qala.
✅ Lintlafatso tse bonoang: Re romella linepe / livideo tsa tsoelo-pele ea tlhahiso.
✅ Tlhahlobo ea Litokomane: Litokomane tse hlophisitsoeng (B/L, Invoice) li rometsoe bakeng sa tumello ea hau pele ho tlhahiso ea ho qetela ho qoba liphoso.
8. Lihlahisoa tse ka sehloohong
P: Lihlahisoa tsa hau tsa mantlha ke life?
A: Haholo-holo re hlahisa li-exchanger tsa mocheso oa moea, li-coolers tse holim'a metsi, li-coil tsa evaporator, li-coil tsa condenser, likhetla le lisebelisoa tsa mocheso oa tube, poleiti.
li-heaters le lisebelisoa tse ling tsa phapanyetsano ea mocheso le mefuta eohle ea li-tubes tse feliloeng, lisebelisoa tsa phapanyetsano ea mocheso, joalo-joalo.
Hot Tags: liindasteri tse sebetsang hantle haholo tse pholileng tsa koporo tsa aluminium fin metsi ho moea oa condenser bakeng sa hvac e nkang sebaka sa 38ap, China e sebetsa hantle haholo indastering e pholileng ea coil tube aluminium fin metsi ho moea condenser bakeng sa baetsi ba hvac ba nkang sebaka sa 38ap, barekisi, feme.
